- 20%

Alternative options

Samsung Galaxy S23 Ultra, Camera Lens Protector, Tempered Glass Pro
In Stoc

(0)

RON 59^.99
Samsung Galaxy S23+, 3D Tempered Glass Easy Fit Full Adhesive 2nd Gen,
In Stoc

(0)

RON 119^.99
Samsung Galaxy A20e Folie Samsung Galaxy A20e, Full Frame and Glue Tempered Glass Vetter GO
In Stoc

(0)

RON 79^.99
Samsung Galaxy S23,S23+, Camera Lens Protector, Tempered Glass Pro
In Stoc

(0)

RON 49^.99
Samsung Galaxy A10, Full Frame and Glue Tempered Glass Vetter GO, Black
In Stoc

(0)

RON 79^.99
- 66%

Samsung Galaxy A50, Galaxy A30, Full Frame Tempered Glass Vetter GO
In Stoc

(0)

RON 19^.95 RON 59^.99
Samsung Galaxy A56, A36, S24 FE, Full Frame and Glue Tempered Glass Vetter GO, Black
In Stoc

(0)

RON 99^.99
Samsung Galaxy A50s Folie Samsung Galaxy A50s, Full Frame and Glue Tempered Glass Vetter GO
In Stoc

(0)

RON 79^.99

Description

For: Samsung Galaxy S21 Ultra

Manufacturer Code: ST3D3DCLSAG998

Colour: Transparent

Package Contents:

1 x Tempered Glass

1 x microfibre cloth

1 x wet cleaning tissue

Equally clear pictures

The film is only 0.35mm thick and 99.99% transparent to ensure high resolution images and videos. The film is coated with an oleophobic coating to minimise smudges and fingerprints.

Bubble-free installation

With our special self-adhesive design, this film is easy to apply without the risk of air bubbles. It also leaves no residue when removed.

Complete room protection

Made from chemically treated glass, Tempered Glass offers the best protection against shocks, scratches and dust, leaving colours and brightness unaffected.

NOTE Due to the curved surface of the screen, Tempered Glass can only cover the flat screen surface. The size of the Tempered Glass is slightly smaller than the phone screen and has been carefully calculated to provide maximum protection

Instructions for fitting individual protective lenses for your phone's cameras:

Clean the camera lenses:
Use a soft, lint-free cloth to gently wipe the lenses.
Make sure no residue or dust particles remain.

Remove the protective film:
Remove the protective film from the adhesive side of the protective lenses.

Apply the protective lenses:
Carefully placeeach protective lens over the corresponding chamber.
Gently press on the edge of each lens to ensure an optimal fit.

Finalise the assembly:
Check that the lenses are securely fitted and that there are no air bubbles or impurities.

Caution.
Remove the phone case before mounting.

Optimum environmental conditions:
Install in an environment with low humidity (below 60%).
Ambient temperature should be above 20°C.

Use isopropyl alcohol:
If using isopropyl alcohol for cleaning, wait until completely evaporated before installation.

Avoiding condensation:
If the phone has been in a cold environment, allow it to reach room temperature (minimum 20°C) before installation.

Vetter constantly endeavours to maintain the accuracy of the information on this page. However, small errors may occasionally occur: the images are for illustration purposes only and may include accessories that are not part of the standard package.

Pentru informatii complete despre livrare, garantie, utilizare si intretinere, va rugam sa parcurgeti aceste materiale